Vision VHD-800X Uživatelský manuál stáhnout pdf (Strana 35)

3.2.6. PTZ

User can set detail for connecting PTZ camera to the DVR.

Check the below items for proper P/T/Z operation.

 Check if the protocol of the connected PTZ camera is correct.

 Check if the communication setting including baud rate of the connected PTZ camera is in

accordance with the assigned value for that P/T/Z protocol.

 Check if the address of the connected PTZ camera is correct.

 Check if wiring to P/T/Z controllers is correct.

Procedure

How to setup PTZ camera with Pelco-D protocol (example)

1) Make sure of serial communication with the PTZ camera through RS-485 port.

2) Select “Pelco-D” in the protocol list, and set address & baud rate.

3) Click “Save” button to confirm this configuration.

Select to use the connected PTZ camera.

Set the ID of the PTZ camera.

Protocol

Select the proper protocol of the connected PTZ camera.

Baudrate

User can select the baud rate level from 2,400bps up to 115,200bps.

Databit

Select Databit in between DATA7 & DATA8.

Stopbit

Select Stopbit in between None & STOP1.

Parity

Select Parity among None, ODD & EVEN.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Žádné komentáře

Vision VHD-800X Uživatelský manuál Strana 35